AGA Cooker Hoods

Available to suit all Electric AGA Cookers - AGA 7 Series, AGA 3 Series, Dual Control, Total Control, Economy 7 (30amp), 13amp, AGA 60, the AGA Six-Four and AGA Masterchef XL.

The AGA 'Pitched' and 'Slab' Sided Extractor Hoods

Three widths and 16 Colour Options to match your AGA

The AGA 'Pitched' Extractor' Hood

To suit 900mm, 1000mm or 1100mm wide cookers and ideal to be fitted above any electric AGA


(Particularly suited to the AGA 7 Series and AGA 3 Series Cookers.)


The AGA 'Slab' Extractor over an AGA 3 Series cooker

LED lights.


Four speed settings with an extract rate up to 800 cubic metres/hour.


The AGA 'Pitched' Extractor over a three oven AGA cooker

The top 'chimney' section is extendable (680mm to 965mm) for different ceiling heights. (Minimum ceiling height is 2400mm and the hood must be at least 800mm above a hob.)


'Delayed off' setting for 10 minute run-on to clear residual cooking fumes.


Dishwasher safe aluminium grease filter.


The AGA 'Pitched' Extractor in Linen

Pitched Hood in Linen


Ducting (not included) - 150mm diameter, maximum 5m and 3 bends (for the most efficient and quiet running use round, smooth-bore duct, as few bends as possible and as short a run as possible).



The AGA 'Slab' Extractor in Pearl Ashes

'Slab' Hood in Pearl Ashes


Installation isn't included and needs to be carried out by your contractor.


Low noise level: 61.6 decibels.


It's always best, and strongly recommended to vent to outside. If that's not possible then you can recirculate by using the appropriate filters (which must be washed/changed regularly).


Two-year parts and labour warranty.

Overall Dimensions

90cm Wide 'Slab' Side

(Click for a larger image)

The AGA 'Slab' Extractor 90cm Wide


90cm Wide 'Pitched' Side

(Click for a larger image)

The AGA 'Pitched' Extractor 90cm Wide


100cm Wide 'Slab' Side

(Click for a larger image)

The AGA 'Slab' Extractor 100cm Wide


100cm Wide 'Pitched' Side

(Click for a larger image)

The AGA 'Pitched' Extractor 100cm Wide


110cm Wide 'Slab' Side

(Click for a larger image)

The AGA 'Slab' Extractor 110cm Wide


110cm Wide 'Pitched' Side

(Click for a larger image)

The AGA 'Pitched' Extractor 110cm Wide

The AGA Super Extractor.

The AGA 'Super Extractor' Hood

1000mm wide and ideal to be fitted above any electric AGA heat storage cooker.
(Particularly suited to the 'Room Vented' versions of the AGA Dual Control or AGA Total Control Cookers.)


Two 50W integrated halogen spotlights.


Available in black (only) with either the contemporary or scroll style AGA badge to match your AGA Cooker.


Four speed settings with an extract rate up to 1000 cubic metres/hour.


'Delayed off' setting for 10 minute run-on to clear residual cooking fumes.


Dishwasher safe aluminium grease filter, with grease filter timer/alarm and filter saturation alarm.


The top 'chimney' section is extendable for different ceiling heights.


To be fitted at least 650mm above an electric or cast-iron hob, or 800mm above a gas hob.

Overall Dimensions

Click image for larger drawing.

AGA Super Extractor Dimensioned Drawing

The AGA Built-In Extractor.

AGA Built-In Extractor Hood

720mm wide and ideal to be fitted above any electric AGA heat storage cooker.
(Ideal for the 'Room Vented' versions of the AGA Dual Control or AGA Total Control Cookers.)


Two 50W integrated halogen spotlights.


Available in stainess steel (only).


Four speed settings with an extract rate up to 870 cubic metres/hour.


Washable grease filter, with warning to clean filter.


Designed to be built in to a joiner made (or kitchen furniture style) housing above the cooker.


To be fitted at least 650mm above an electric or cast-iron hob, or 800mm above a gas hob.

Overall Dimensions

Click image for larger drawing.

AGA Built-In Extractor Dimensioned Drawing

The AGA Six-Four Extractor.

AGA S-Series Six-Four Cooker Hood

898mm wide (Nomimal 900mm).


Three integrated halogen spotlights.


Available in black (only) with contemporary style AGA badge.


Three speed settings with an extract rate up to 1000 cubic metres/hour.


Washable grease filter.


The top 'chimney' section is extendable for different ceiling heights.


To be fitted at least 650mm above an electric or cast-iron hob, or 800mm above a gas hob.


More on the AGA Six-Four Cooker

Overall Dimensions

Click image for larger drawing.

AGA S-Series Six-Four Cooker Hood Dimensioned Drawing

The AGA Masterchef XL Extractor.


AGA Masterchef XL Cooker Hood

1098mm wide (Nominal 1100mm).


Integrated halogen lighting.


Available in black (only) with AGA badge and front-rail to match your Masterchef XL Cooker.


Three speed settings.


Washable grease filter.


The top 'chimney' section is extendable for different ceiling heights.


To be fitted at least 650mm above an electric or cast-iron hob, or 800mm above a gas hob.


More on the AGA Masterchef Cooker

Overall Dimensions

Click image for larger drawing.


AGA Masterchef Cooker Hood Dimensioned Drawing

The AGA 60 Extractor.


AGA 60 Cooker Hood

598mm wide (Nominal 600mm).


Two halogen lights.


In gloss black to match your AGA 60 Cooker.


Three speed settings.


Washable grease filter.


The top 'chimney' section is extendable for different ceiling heights.


To be fitted at least 650mm above a hob.


Ideally 150mm diameter smooth bore round ducting should be used (125mm permissable if necessary). A recirculating kit with charcoal filter can be ordered separately. (It's always best and is recommended to duct to outside.)


More on the AGA 60 Cooker

Also suitable for above the AGA Freestanding Module.


Overall Dimensions

Click image for larger drawing.


AGA 60 Cooker Hood Dimensioned Drawing